June , 2020

Twenty years ago, the fuel gauge IC did not appear. The earliest design was that the single chip microcomputer detected the battery voltage through the AD port to determine the remaining battery capacity. This method of voltage detection discharges the battery small current, and the battery power error is still accurate because If the voltage gradually decreases, just set a few fixed voltage points to judge, such as 100%, 75%, 50%, 25%, 10% voltage corresponding to several capacities...

After years of development, the lithium battery industry has formed a complete industrial chain with a high degree of specialization. Do you know how the lithium battery is made?

The battey as one of the most important parts of electric vehicles, batteries are also valued by major car companies. At present, there are mainly two types of batteries used by car companies to install vehicles: ternary lithium batteries and lithium iron phosphate batteries. However, BYD's blade battery (a new generation of lithium iron phosphate battery) was born, and car companies also have a more competitive battery option.

The INRUSH PEAK discharge current and continuous discharge current mainly depend on the battery cell. The overcurrent protection of the protection board only sets a safe discharge current parameter for the battery. If the battery works within this safety parameter, no safety will occur. (but if the discharge current exceeds the load current of the cell allowed, it may also shorten the battery cycle life)

Both the camera drone battery and the mobile phone battery are lithium-ion batteries. The drone battery is the source of power for the device and has higher requirements for its safety performance. However, there is a difference between the two. The drone battery has a significant feature compared to the mobile phone battery --- high rate discharge. The drone battery needs a large current to discharge to meet the requirements of the drone in different environments. For example, in aerial photography, if a strong wind is encountered, the battery must be discharged with a large current to ensure the stability of the drone's position. Because of different requirements, the life of the camera drone battery is relatively short.

Polymer lithium ion battery is a kind of lithium ion battery, but compared with liquid lithium ion battery (Li-ion), it has high energy density, more compact, ultra-thin, light weight, high safety and low cost Many obvious advantages are a new type of battery. Below we detail the advantages and disadvantages of polymer lithium-ion batteries:

Generally speaking, the most common power batteries are lithium iron phosphate batteries, lithium manganate batteries, lithium cobalt oxide batteries, and ternary lithium batteries.